Re: ADIS 16405 Output Problems Using Raspberry Pi
I have checked the wiring and nothing was connected to the DNC lines so it would appear that this was not the issue.
View ArticleRe: ADP2114/2116 output current
This app note has some additional details about the subject.Powering the AD9268 Dual Channel, 16-bit, 125 MSPS Analog-to-Digital Converter with the ADP2114 Synchronous Step-Down DC-to-DC Regulator for...
View ArticleADuC7060/61: What to do with unused JTAG pins?
In previous postings, two different and contradictory answers where given for the question: What to do with the unused JTAG pins? In one answer, it is recommended to add external pull-ups to the JTAG...
View ArticleClik here to view.
Re: EVAL-ADE7753 Software error
Hey Hamni First ,sorry for delaying , But i have mid term exams Today I get some screen shots from my pc. Hamni notice that , there are error in reading , and the RMS values not accurate , etc... I'm...
View ArticleClik here to view.
ADXL345 Data read rate
Hello, I'm having some issues with the data read rate on my ADXL345. I'm using I2C to connect the ADXL345 to a Raspberry Pi using the Python library here:...
View ArticleRe: Circuit Board Desgin of the ADIS16488
Hi RobinUofC, Yes, you can cut that part of the ADIS16IMU1/PCB off. If you have one, you should be able to see where all of the traces are, as this is only a two-sided PCB. I am not 100% sure of what...
View ArticleRe: gpio-addr-flash memory window overrun with large I/O block size
Have you configured the CPLB properly for your gpio expanded address space? Check this thread for some discussion on this topic http://ez.analog.com/message/133787
View ArticleRe: Plug TXA or TXB would affect the other output port normal display when...
Hi, Sir,Is it possible to meet this need that TXA or TXB can display normally, which won't be affected by hot plugging the other TX end. If it is possible, how cant it be achieved? Can you kindly tell...
View ArticleRe: bf516 network sometimes become very slow
This sounds strange, what's is your network application in your product, do you see a real "slowing down" for your actual network application?
View ArticleRe: Difference between 2018 and SSM SSM 2018PZ
Meanwhile, thanks for the risposta.Devo replace ssm2018 without ending themes with a ssm 2018PZ there are differences? thank you very much Da: "ColemanR"...
View ArticleRe: Difference between 2018 and SSM SSM 2018PZ
Meanwhile, thanks for the risposta.Devo replace ssm2018 without ending themes with a ssm 2018PZ there are differences? thank you very much
View ArticleRe: AD9361 Tx Power
Tx power level of AD9361 is almost right, which can be about 8 dBm. However, the attenuation has no effect for Tx power. Any value SPI writes into 0x073 & 0x074, it still outputs the max power.
View Articleseveral questions about STDI
adv7842 or adv7441a How to calculate BL?where can I find the detail parameter about different video format(RGB and HDMI) SVGA@60hz(800*600@60hz),according to 《VESA and Industry Standards and...
View ArticleRe: bf516 network sometimes become very slow
Use network to send recording data to PC.When network is slower lead to loss packet. Use iperf to test network capability, The network speed is very slower. somtimes about 1Mbit/s.
View ArticleRe: How to compute the Energy values ? (ADE7880)
Hi David,Thank you for your very useful answer. I understood the calculation you just explained.So if I work on a system with max 330Vrms and 2000Arms (which will correspond to +500mVrms both). All my...
View ArticleRe: A simple application for SDP/DAC ev board
Hi, Answering your second question, we are not providing support to control the SDP. Say that, the functions are public so, you can figure out easily how it works. Your first question is little bit...
View ArticleRe: A simple application for SDP/DAC ev board
Hi,what do you mean "the functions are public"? Where can I found this documentation? About the first question: on the PC (USB connected with the SDP-B) I need to configure:- a fix voltage- a...
View ArticleVivado ZED project no I2C connection to ADV7511
Same problem. - I checkout latest HDL libraries and project scripts from https://github.com/analogdevicesinc/hdl- Built HDL libraries and ADV7511 for ZedBoard using Vivado 2014.1 - I just needed to...
View ArticleRe: Vivado ZED project no I2C connection to ADV7511
I've split this out into a separate discussion as it appears to be a separate issue.
View Article