Re: Bitstream from EVAL-CED1Z
Hi mhay, I have sent you a private message. Regards,Jarwin
View ArticleRe: AD7903 Simultaneous Sampling
Hi, Dirk. This looks good but please note that the slave controller has its own /CS. You may also opt to have both controllers configured as Master (then use both MISO pins to acquire data from both...
View ArticleRe: Setup ADP1050-51 GUI
Hi Kevin, Can you please set your OS to English language? The issue will be solved.
View ArticleRe: EVAL-7993 not functioning - "Firmware Not Loaded!" error
Hi, Thom. I suggest to have the student try the newer version of the installer downloadable from the product page that I linked to earlier. Regards,Karen
View ArticleRe: A question about AD-FMCOMMS1-EBZ
Hi AdrianC, After changed the FCLK_CLK3 to 30 MHz and it is not useful , but I found the new code which is HDL code(2014.2) and it could be solved this problem.Thank you for your help these days !PS:...
View ArticleZedboard+AD-FMCOMMS2-EVB, Vivado 2013.4
I want to run the no-os code in Vivado 2013.4 with Zedboard, I download the reference design hdl_2014_r1 . I building the project by running below script. Please help to check whether the script is...
View ArticleAD9136 FMC card reference design support?
I was interested if there are plans to support the new AD9136 FMC card with a reference ZC706 or Mini-ITX design. It looks as if the current AD9144 FMC HDL and Linux drivers could be altered to...
View ArticleClik here to view.
Re: Setup ADP1050-51 GUI
Hi Kevin, See the details of the seup. Please let me know if you have any question. BR/James
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, Is your goal to get Linux running on the BF506? As far as I know, that chip isn't supported by the ADI Linux Project.Aaronwu might be able to give you some more information. Regards, Andre.
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hello Andrewthank you for answering.I would like to use the linux toolchain to program the BF506, I didn't know it was not supported by the ADI linux project.
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, My apologies, I mustn't have understood. Is your intention to build bare-metal applications and boot them via U-Boot? If not, can you please provide me with more information of what you...
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hello Andrew,I might be not clear about my intentions as I am still learning a lot about this topic. I saw the linux toolchain as an alternative to Visual DSP++ to program (or simulate) a Blackfin...
View ArticleRe: FMCOMMS5
thanks Dragos! managed to replicate BOOT.bin with newlly build PL file.-shai
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, I'm assuming that you're walking through this 'hello world' example. Please be aware that this application will be compiled to run on the Linux environment. As you can see from this page...
View Articlead9520 eval software under win8/virtualbox?
I've been using the eval software under 64-bit windows 7. I want to use the eval software on my 32-bit ubuntu 14.04 laptop. I've installed VirtualBox 4.3.18 and am hosting 32-bit win8. The win8 seems...
View ArticleADV7619 color space conversion
Hi,I'm trying to use the ADV7619 to convert a YCbCr input to RGB output when the source is DVI putting out YCbCr. I know this signal is out of spec (DVI is RGB only), but I want to be able to handle...
View ArticleClik here to view.
technical document for your good ADV7626
Dear Sir/Madam, Good news for you.Our customer choiced your ADV7626, and requested the design support note as "Register Settings Recommendations".So where can I bring the register setting document for...
View ArticleRe: AD9671EBZ: looking for schematic link
Hello Steve, Attached is the schematic file for the AD9671EBZ board that was also sent to you by email. ThanksAshraf
View ArticleHow to connect between SS and CCES project.
Hi, I am going to add a OffChipDelay functionality into SigmaStudio schematic and CrossCore application. I have already read <Off Chip Delay (External Port)>...
View Article